ALUMINIZED PROTECTIVE HOOD COBALTO ref. C1 109

Aluminized Hood with lens COBALTO Collection. Panoramic lens. Built-in helmet. View Window Size: 210 x 110 mm. Lends not included. For lens to place see references: A1 001 y A1 002.
Multilayer aluminized garments. With them we can tolerate temperatures up to 500 degrees or longer exposition time.
Ideal for high temperatures exposition or prolonged used.
The range of cobalt clothing and equipment are designed for situations with high heat levels. The products are suitable for situations with a high thermal load, or if there is long work time. The range is made of a combination of layers which combine to provide very high levels of insulation. The outer layer is made of aluminized fabric with a 370g/ m2 para-aramid frame. The intermediate layer is made of 370g/m2 Protex® fabric, and gives substantial protection with a design that creates an air pocket inside the clothing. The inner lining is made of 130g/m2 Protex®. This fabric provides the range with an optimal level of comfort, without sacrificing the level of protection. For situations of extreme levels of heat, it is recommended to use additional insulating clothing or suits with a higher level of protection. To accommodate the requirements of the work activity, we provide a wide range of clothing that together protect all parts of the body. Each user should identify the items that are required depending on the risk assessment that has been carried out on the work activity. The standard range includes the following items: protective hood, helmet cover, jacket, 3/4 length jacket, coat, trousers, overalls, apron, long sleeve apron, shoulder length protective sleeves, elbow length protective sleeves and leggings.
Category III PPE (Personal protective equipment):
A- Flame behaviour: A1-A2
B- Convective heat: B2
C- Radiant heat: C4
D- Small splashes of molten aluminium: D3
E- Small splashes of molten iron: E3
F- Contact heat: F3
UNE-EN ISO 11612:10