ALUMINIZED HELMET COVER RODIO ref. C1 210

Aluminized Helmet cover RODIO Collection. Front closure using Velcro® FR. Metal support for the visor. Includes gold polycarbonate visor ref. P3 018 (Category III PPE - UNE-EN ISO 11612:10). Built-in helmet FR.
It is one of the few suits in the market that reaches the maximum protection against convective heat, B3. Appropriated for works in very hot conditions (up to 800 degrees). Its construction, with 5 layers, slows the heat into the body, it allows very longer exposition time. In addition, it behaves very well against molten metal splash.
These kind of equipment offer a sustainable protection in all extreme situations.
The range is made of a combination of five layers which provide very high levels of insulation. The outer layer is made of Preox fabric which has undergone ceramic treatment. This gives an outstanding performance when the wearer is faced with the thermal load. It is a particularly resistant fabric, so it has a long useful life. Next, two needle-punched Preox layers are added, then a layer of 370g/m2 Protex® fabric, which provides significant protection with a design that creates an internal air pocket. The inner lining is made of 130g/m2 Protex®. This fabric provides the range with an optimal level of comfort, without sacrificing the high level of protection. To accommodate the requirements of the work activity, we provide a wide range of clothing that together protect all parts of the body. Each user should identify the items that are required depending on the risk assessment that has been carried out on the work activity. The standard range includes the following items: protective hood, helmet cover, jacket, 3/4 length jacket, coat, trousers, overalls, apron, long sleeve apron, shoulder length protective sleeves, elbow length protective sleeves and leggings.
Category III PPE (Personal protective equipment):
A- Flame behaviour: A1-A2
B- Convective heat: B3
C- Radiant heat: C3
D- Small splashes of molten aluminium: D3
E- Small splashes of molten iron: E3
F- Contact heat: F3
UNE-EN ISO 11612:10